Roadmaster RM3477 Informations techniques télécharger pdf (Page 27)

KIT# 521190-1

05/03/10

All illustrations and specifications contained herein are based on the latest information available at the time of publication approval.

ROADMASTER, INC. reserves the right to make changes at any time without notice in material, specification and models or to discontinue models.

1. Important: please use all supplied bolts and parts and read all instructions carefully before beginning this

installation. The majority of questions you may have can be answered within the text, and proper installation will

ensure safe and secure travel. Now, begin the installation. Remove five plastic fasteners attaching the top of the fascia

to the core support (Fig.C).

2. On each side, remove a Phillips head screw attaching the corner of the fascia to the fender (Fig.D).

3. Remove five plastic fasteners and four Phillips head screws attaching the bottom of the fascia to the splash shield

(Fig.E).

4. Disconnect the fog lights, if the vehicle is so equipped.

Pull out and forward to remove the fascia (Fig.F).

5. On each side, remove four 12mm (head) bolts attach-

ing the bumper core to the end of the frame rail.

Note: only three bolts are shown in Figure G. The

fourth is to the inside of the bumper core.

Note: the bumper core will not be replaced. Retain the

bumper core and attachment hardware so that it can be

replaced if the bracket is ever removed.

Fig.C Fig.D

Fig.E Fig.F

Fig.G

MOUNTING BRACKET KIT

INSTALLATION INSTRUCTIONS

ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 1-800-669-9690 fax 360-735-9300 www.roadmasterinc.com

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 119 120

Pas de commentaire

Roadmaster RM3477 Informations techniques Page 27